Yesterday I wrote about the wool wrapped wire snowflakes we made... Today I'm bringing you something much cuter, Rudolf the red nosed reindeer, made in the same way as the snowflakes.
We started in a similar way to the snowflakes, my husband began by drilling small holes into some left over dowel and inserting the wire to make a reindeer shape as seen in the photo below. My daughter also made one with an old cork and some wooden skewers as you will see in the last photo.
After getting the basic shape I then wrapped the entire reindeer in brown wool until every last piece was covered. I managed to use one continuous piece of wool again as this is easier to fasten off the end with a spot of glue.
To finish I toyed with the idea of a small, shiny red button or bead for his nose but in the end we opted for a little red pom pom and a quick spray of glitter.
He makes a very cute addition to our festive decorations this year, my daughter absolutely loves him and has made one of her own. She decided to paint her reindeer instead of wrapping him in wool.
And then there were two...
A thrifty and natural life...full of magical crafts, money saving tips and home educating along the way.
Saturday, 21 December 2013
Friday, 20 December 2013
Wool Wrapped Wire Snowflakes
Every year we try to make some new decorations for our tree, this year we have been so busy I'm only just getting around to posting them here. One of my favourite things were the wool wrapped wire snowflakes... so simple but they look so lovely on the tree.
First I made the basic shape of a snowflake with wire, any wire will do as it will be covered, I've just used cheap garden wire. My husband soldered three lengths of wire in the middle to hold them together but it is possible just to wind the wire to get the basic shape. The smaller pieces of wire on each arm are just wrapped around the larger wire, once the wool is added they will fix better in place.
Then it's time to wrap the entire wire snowflake in wool, I used white for snow. I did this in one continuous piece starting from the centre and going down each arm in turn then back to the centre so that it is covered with two layers of wool, before going down the next arm. This made it easier to fix the end of the wool when the snowflake is completely covered with just one spot of glue.
When the wool wrapping is finished your snowflake will look like the photograph above. I decided to add a tiny pearl bead to the end of each wire like a little stopper, adding a spot of glue to hold it on. This not only looks pretty it also covers the wire ends in case it is a little scratchy and helps to hold all the wool in place.
Here is the finished snowflake after a quick spray with glitter spray, ready to have a loop added to hang on the tree. These look gorgeous hanging on the tree, are very simple and quick to make and we think they look quite stylish too.
We would like to take the chance to wish you all a Merry Yule / Christmas from all of us here.
First I made the basic shape of a snowflake with wire, any wire will do as it will be covered, I've just used cheap garden wire. My husband soldered three lengths of wire in the middle to hold them together but it is possible just to wind the wire to get the basic shape. The smaller pieces of wire on each arm are just wrapped around the larger wire, once the wool is added they will fix better in place.
Then it's time to wrap the entire wire snowflake in wool, I used white for snow. I did this in one continuous piece starting from the centre and going down each arm in turn then back to the centre so that it is covered with two layers of wool, before going down the next arm. This made it easier to fix the end of the wool when the snowflake is completely covered with just one spot of glue.
When the wool wrapping is finished your snowflake will look like the photograph above. I decided to add a tiny pearl bead to the end of each wire like a little stopper, adding a spot of glue to hold it on. This not only looks pretty it also covers the wire ends in case it is a little scratchy and helps to hold all the wool in place.
Here is the finished snowflake after a quick spray with glitter spray, ready to have a loop added to hang on the tree. These look gorgeous hanging on the tree, are very simple and quick to make and we think they look quite stylish too.
We would like to take the chance to wish you all a Merry Yule / Christmas from all of us here.
Tuesday, 10 December 2013
Garden Charms and Bird Treats
At this time of year, as the weather gets colder, our thoughts go to feeding the birds. This is our way of giving something back to nature to replace the berries we foraged in autumn. As well as making sure the bird table and feeders are full we have also been making some garden charms, which look very pretty hanging in the trees and provide an extra feast for our feathered friends.
For the charms we have used some garden wire bent into the shape of a heart or star and various dried berries and nuts. The heart shape has been threaded with rosehips and raisins.
When fully threaded the shape was secured safely with either tape, string or wire and a loop was added to hang it on the tree.
We also made a star shape which was threaded with chestnuts and Rowan berries. It is harder to see the shape of this one as the chestnuts are much larger. Anything that birds find tasty can be threaded onto your wire shape and they look gorgeous hanging in the garden.
The pine cone feeders have been a firm favourite with the children for quite a few years now. First attach string or wire for attaching the feeder to the tree as seen in the above photo. Then coat your pine cone with either peanut butter or lard and roll it in bird seed.
These little pine cone feeders usually attract the small birds that are a bit nervous about visiting the bird table when larger birds are around. They are very simple and a lot of fun to make even for very small children.
I will leave you with a couple of photographs of the garden charms and pine cone bird feeders hanging in the trees. They add some much needed colour to the garden this time of year.
The children love feeding the birds and this also provides them with extra opportunities for bird watching.
For the charms we have used some garden wire bent into the shape of a heart or star and various dried berries and nuts. The heart shape has been threaded with rosehips and raisins.
When fully threaded the shape was secured safely with either tape, string or wire and a loop was added to hang it on the tree.
We also made a star shape which was threaded with chestnuts and Rowan berries. It is harder to see the shape of this one as the chestnuts are much larger. Anything that birds find tasty can be threaded onto your wire shape and they look gorgeous hanging in the garden.
The pine cone feeders have been a firm favourite with the children for quite a few years now. First attach string or wire for attaching the feeder to the tree as seen in the above photo. Then coat your pine cone with either peanut butter or lard and roll it in bird seed.
These little pine cone feeders usually attract the small birds that are a bit nervous about visiting the bird table when larger birds are around. They are very simple and a lot of fun to make even for very small children.
I will leave you with a couple of photographs of the garden charms and pine cone bird feeders hanging in the trees. They add some much needed colour to the garden this time of year.
The children love feeding the birds and this also provides them with extra opportunities for bird watching.
Subscribe to:
Posts (Atom)